 | contacts |
| technologies | ||
|
SABIC debuts new copolymer resin for PV connectors, delivering highest CTI level to support emerging 1.5Kv systems 15 Nov 2022 SABIC debuts new copolymer resin for PV connectors, delivering highest CTI level to support emerging 1.5Kv systems BERGEN OP ZOOM, THE NETHERLANDS, November 15, 2022 - SABIC, a global leader in the chemical industry, launched today a breakthrough polycarbonate (PC)-based copolymer resin, well-suited for photovoltaic (PV) connector bodies, that meets stricter performance and regulatory requirements for emerging 1.5Kv solar systems. The new LNP™ EXL9334P copolymer resin achieves the highest comparative tracking index (CTI) level (UL PLC0) and IEC as Material Group 1 (IEC MG 1). It also delivers low-temperature ductility, good dimension stability, excellent heat resistance, good durability and weather resistance and flame retardance. With high performance across all key properties, this specialty resin surpasses competitive materials such as glass-reinforced nylon, polyphenylene ether (PPE) and standard PC. Customers could also benefit from the cost-effective design flexibility and processing efficiency of this injection-molding thermoplastic. “To help photovoltaic customers keep pace with industry trends, particularly the move from 1.0 to 1.5 kilovolt systems, SABIC is proactively developing novel, higher-performance materials, ” said Joshua Chiaw, Director, Business Management, LNP & NORYL, SABIC. “Our next-generation LNP EXL9334P resin grade, which meets stringent international standards for 1.5 kilovolt components, can facilitate adoption of this efficient, cost-effective technology. In addition to addressing changing industry requirements, this new material supports our sustainability strategy by helping to promote greater use of renewable solar energy.” Top Performance in All Key Areas The emergence of 1.5 Kv PV systems is a major industry trend that offers efficiency improvements and potential system cost reduction. However, the transition from 1.0 Kv to 1.5 Kv systems is also leading to more-stringent performance and safety standards for all components. The main requirement is high CTI performance (UL PLC0 and IEC MG 1) to withstand 1, 500 system volts without breaking down. Other properties are also critical, including ductility under exposure to very cold outdoor temperatures. New LNP EXL9334P copolymer resin delivers high performance in all key properties needed for 1.5 Kv components, compared to competitive materials that fall short in certain respects like dimension and impact. In addition to achieving a high CTI (UL PLC0 and IEC MG 1), the SABIC material provides low-temperature impact down to -40°C, good weatherability (UL 746C f1 listing) and good dimensional stability. This new product also meets the UL94 V0 standard for flame retardance at 1.2mm and delivers long-term heat resistance. “Developing a flame-retardant copolymer that could achieve the highest CTI level was difficult, but our experts were up to the challenge, ” said Jenny Wang, Director, Formulation and Application, APAC, SABIC. “The SABIC team combined innovative thinking with technical expertise and successfully developed LNP EXL9334P resin, which meets the most demanding requirements across the board. Our efforts have been validated by customers during material trials. They are happy with its properties, particularly its signature impact resistance at extremely cold temperatures, which help solve their problems. We’ll continue to work on new solutions to support the high growth and new technology of the solar photovoltaic industry.” New LNP EXL9334P copolymer resin is globally available. Reader enquiries SABIC Europaboulevard 1 6135 LD Sittard Netherlands +86 21 2037 8436 yvonne.yan@sabic.com www.sabic.com Notes for editors SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates. SABIC should be written in every instance in all uppercase. ABOUT SABIC SABIC is a global diversified chemicals company, headquartered in Riyadh, Saudi Arabia. It manufactures on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high performance plastics, agri-nutrients and metals. SABIC supports its customers by identifying and developing opportunities in key end-use applications such as construction, medical devices, packaging, agri-nutrients, electrical and electronics, transportation and clean energy. SABIC recorded a net profit of SR 23 billion (US$ 6.15 billion) in 2021. Sales revenues for 2021 totaled SR 174 billion (US$ 46.6 billion). Total assets stood at SR 318 billion (US$ 84.9 billion) at the end of 2021. Production in 2021 stood at 58 million metric tons. The company has more than 31, 000 employees worldwide and operates in around 50 countries. Fostering innovation and a spirit of ingenuity, SABIC has 10, 090 patents and pending applications, and has significant research resources with innovation hubs in five key geographies – USA, Europe, Middle East, South Asia and North Asia. Related images SABIC’s breakthrough polycarbonate (PC)-based copolymer resin, well-suited for photovoltaic (PV) connector bodies, meets stricter performance and regulatory requirements for emerging 1.5Kv solar systems. SABIC’s breakthrough polycarbonate (PC)-based copolymer resin, well-suited for photovoltaic (PV) connector bodies, meets stricter performance and regulatory requirements for emerging 1.5Kv solar systems. Editorial enquiries Yvonne Yan SABIC +86 21 2037 8436 yvonne.yan@sabic.com Stephanie Wakkee Marketing Solutions NV +32 3 31 30 311 |
| |
| technologies | ||
© 2007 | ||