|
contents | technologies | |||||||||
| Another four Putzmeister concrete pumps for Fukushima  Since 22.3.2011 a 58-metre Putzmeister large-boom pump has been pumping water for cooling at the atomic power plant in Fukushima. A few days ago, the Japanese operator decided to use another four Putzmeister machines at the damaged reactor blocks in Fukushima: Two 62-metre-high machines with 6 arms (M 62-6) and two 70-metre-high machines (M 70-5). All the machines are from Germany. The two 70-metre pumps are to be taken from construction sites in the USA. The first machine will probably be flown from Stuttgart to Japan on 31.03 in an Antonov wide-bodied aircraft, and the other machines will be flown in during the following days. Initially, they will probably pump water; later they will be used for any necessary concreting work.The two large-boom pumps are characterised by their enormous vertical reach of almost 62 or 70 metres, as well as their particularly flexible boom kinematics. This means the uppermost arm of the booms can reach over the edge of the reactor buildings and into the buildings from above, and thus discharge the water where it is needed. Thanks to its 6 arms, the M 62-6, for example, is considerably more flexible than a comparable 5-arm boom with a similar range. The M 70-5 truck-mounted concrete pump is the largest series-produced truck-mounted concrete pump in the world. It is mounted on a semitrailer pulled by a 500 HP tractor unit. In order to ensure even distribution of the weight of 80 tonnes, the vehicle has 10 axles over a total length of 21.4 metres. write your comments about the article :: © 2011 Construction News :: home page |