![]() |
contents | technologies | |||||||||
| Control gear for Xeradex excimer lamp ![]() Operating OSRAM Xeradex xenon excimer lamps in patented pulsed mode means high conversion efficiency can be achieved. About 40 percent of the coupled electrical power is emitted as usable vacuum ultraviolet (VUV) radiation with a wavelength of 172nm. Xeradex lamps are therefore among the most efficient systems currently available. Other advantages include being ready to operate without any warm-up time, unlimited switching cycles, the capability of instant restrike without affecting operating life, and low energy consumption. VUV radiation is capable of removing a large number of organic compounds. As such, Xeradex lamps represent an environmentally friendly and often lower cost alternative to chemical processes. Furthermore, they do not contain mercury. High energy Xeradex lamps are suitable for a large number of applications – from surface cleaning in the semiconductor or LCD industry and ozone production to lacquer frosting of floor coverings or in furniture production. The lamps are used in order to activate surfaces, as well as for the removal of photoresist or the etching of plastic surfaces. Procedures such as CVD processes, metallisation or oxidation of surfaces can be carried out with VUV radiation at low process temperatures. The EVG DBD 300/110-240 DIM complements OSRAM's product range of electronic control gear for Xeradex lamps in the medium power segment up to 300W and an effective bulb length of 375 to 910mm. The entire power range of 20W (bulb length <170mm) up to 1000W (bulb length up to 2100mm) is now completely covered. write your comments about the article :: © 2010 Construction News :: home page |