|
contents | technologies | |||||||||
| SawStop table saw safety system  The SawStop Table saw is demonstrating that it is a game changer when it comes to tablesaw safety in the woodworking shop. The company has already documented over 600 cases in which its unique patented safety system has prevented serious injury to the tablesaw operator's fingers. The state-of-the-art SawStop safety system will cause a sawblade spinning at 100 mph to decelerate to a complete stop within 5 milliseconds after the blade comes in contact with a woodworker's hand or finger. The SawStop table saw safety system works in this way: the SawStop sawblade carries a small electrical charge that is constantly monitored. When skin comes in contact with the blade, the human body's capacitance alters the charge on the sawblade and this change is immediately detected by the safety system, which triggers the release of a heavy spring, jamming an aluminum brake into the teeth of the spinning sawblade. Within milliseconds the blade comes to a complete stop. After the aluminum brake stops the sawblade, the blade's centrifugal force causes it to instantly retract below the surface of the table just as the tablesaw's electrical motor shuts off. Equipping a woodworking shop with a SawStop tablesaw greatly reduces the likelihood of a serious tablesaw injury occurring. The SawStop tablesaw has recently become a major safety solution for schools, contractors, cabinet shops, furniture factories, and countless amateur woodworking shops. When shown how the SawStop tablesaw can reduce the hazards of operating a woodworking shop, in many cases insurance companies have begun factoring the reduced risk into their rates and policies. write your comments about the article :: © 2009 Construction News :: home page |