|
contents | technologies | |||||||||
| Three new Worksite Pro attachments  John Deere Construction & Forestry has added three new Worksite Pro attachments for its skid steer and compact track loaders: a side discharge bucket, a rotary cutter and a mulching head. The roster of Worksite Pro attachments numbers more than 100. Four side discharge buckets ranging in widths from 60 to 84 inches come in two styles. The SD (Dust) models are for lighter materials such as mulch, sawdust and straw, while the SA (Aggregate) models are for materials such as lime, sand or gravel. Worksite Pro side discharge buckets feature a direct drive hydraulic motor on the discharge belt and allow unloading from either the left or right side of the bucket. Manually adjusted discharge gates control material flow. The SD models have an agitator driven by a separate motor to prevent light materials from bridging and to ensure a more consistent flow of material. SA models have a bridging plate to keep weight off the belt and prevent motor stalling. All side discharge buckets are compatible with standard-flow Deere machines. Worksite Pro rotary cutters are available in three cutting widths: 60 inches, 72 inches and 78 inches. All four models are matched with standard-flow skid steers and compact track loaders. All rotary cutters have a heavy-duty quarter-inch-thick steel deck with formed side plates and heavy-duty skid shoes for added strength and rigidity. That means they have the ability to handle up to 4-inch saplings and heavy brush. A limit lifting chain, side discharge and double-edge blades are standard for maximum performance. A stump jumper feature eases operation and protects the gearbox. Plus, the standard blade stall indicator allows operators to see when blades are in an overload condition. The optional front wheel kit helps prevent the front of the cutter from digging into the ground and keeps the mower deck level while cutting. Its tire is non-pneumatic. The two L model rotary cutters, with 60- and 72-inch cutting widths, have a flow of 15-19 gpm, while the other two models are 22-24 gpm. This is to keep the optimum blade rotation for the auxiliary flow of the skid steer or compact track loader. The John Deere Worksite Pro MH60 mulching head is a heavy-duty unit designed for severe applications. Head geometry is configured to work effectively with the carrier range of motion without the operator having to fully extend the loader arm cylinders, allowing efficient shredding and mulching. With a 60-inch maximum cutting width and a 74-inch overall width, this attachment is perfectly matched with John Deere high-flow 328 and 332 skid steers and the CT332 compact track loader. Recommended flow for the MH60 is 27-45 gpm. The attachment's weight is 2,497 pounds. write your comments about the article :: © 2009 Construction News :: home page |