|
contents | technologies | |||||||||
| Trespa International has introduced TS2000  Trespa International has introduced TS2000 - a proprietary fixing system, containing a patented clip for interior wall cladding applications with a range of installation and application benefits. Key benefits are ease and speed of installation. The TS2000 system has been applied successfully in a range of key applications where the system is able to meet hygiene, fire and sound requirements to the full, when used in combination with Trespa Virtuon panels and a range of specific joint solutions. Trespa Virtuon panels for interior wall cladding are already used extensively in highly demanding interior applications. Trespa Virtuon panels have a smooth, non-porous surface and core which is impact and scratch resistant. Seamless installation is key, especially in healthcare environments or clean room areas, as seams provide potential hiding places for bacteria. For effective use of TS2000 in these types of applications, Trespa International advises installers to use 3M VHB tape. This provides a secure seal for Trespa panel constructions, only requiring one expansion joint every 6 m. To ensure a smooth finish, a special TrespaCord or a sealant approved for use in healthcare environments may be applied. Both products have been approved for use in Operating Rooms and Cleanrooms. The Trespa TS2000 system is based on existing wall fixing systems, using specially designed aluminium profiles. Using Textron Rev-Screws, Trespa panels are fitted with a specially designed Z-profile. These profiles fit into patented clips, mounted on C-profiles or a metal-stud wall system. The result is an invisible mounting system, which can be installed in a short time, with minimum on-site activity. The TS2000 fixing system meets the European standards for safety regulations and will not release any toxic substances or fumes. TS2000 wall cladding systems have been subjected to fire tests. Two separate wall constructions were subjected to regulatory fire tests and were certified for 30 and 60 minutes. Sound isolation tests proved successful too – three separate TS2000 types of construction yielded results of up to 64 dB. Finally, TS2000 constructions, using Trespa Virtuon, can be installed dry in a minimum of time - with little or no dust being released, thus reducing the risk of release of airborne particles capable of transporting micro-organisms. Once installed, changes or relining walls can be achieved with minimum dust and or disposal issues. write your comments about the article :: © 2008 Construction News :: home page |