|
contents | news | |||||||||
| New Corr-Paint provides hi-temp corrosion resistance Corr-Paint CP2020, a new gray-pigments, high temperature, high performance coating developed by Aremco Products, is now used to provide high temperature corrosion resistance on steel components and structures exposed to oxidation and corrosive atmospheres to 400°F. Aremco's Corr-Paint CP2020 is a single part, gray-pigmented, low viscosity, polymeric coating that dries and cures at room temperature to a hard, non-porous, abrasion resistant surface. CP2020 is extremely resistant to hydrochloric, nitric, ethylene chloride and sulfuric acids, and has also survived long-term salt fog, salt spray and humidity testing of over 1000 hours. Corr-Paint CP2020 is supplied with a viscosity of 200-240 cps, specific gravity of 1.05 gms/cc, and solids by volume of 49.0%, and solids by weight of 67.0%. It is typically applied in a 4.0 mil wet film thickness that dries to approximately 2.0 mils. The theoretical coverage rate in a 1.0 mil dry film is 722 ft2/gal. Corr-Paint CP2020 can be used in combination with Aremco's Corr-Prep CPR2000, a solution that is used to prepare extremely smooth surfaces for coating. CP2020 can also be applied directly to severely rusted surfaces found in many maintenance and repair applications. Application methods include brush, roller or conventional pneumatic spray equipment. Typical applications include the coating of OEM components such as motor housings, bag houses, cyclones, hoppers, pipelines and precipitators, to the coating of large structures found in MRO applications throughout the power, pulp and paper, and chemical processing industries. CP2020 is available from stock in pint, quart, and gallon quantities. write your comments about the article :: © 2006 Construction News :: home page |