|
contents | news | |||||||||
| Norton Charger Plus depressed center wheels  The zirconia alumina abrasive in Norton Charger Plus wheels is the grain to cut and grind stainless steels. The smooth grinding action enhances both the cut rate and life of the wheel and lets the wheel do the work, not the operator. The clean bond contains no sulphur, iron or chlorine - eliminating the opportunity for contamination - and makes the wheel softer acting. Charger Plus wheels for stainless applications are available in 1/8-inch thickness for cutting and light grinding and ¼-inch thickness for heavier stock removal. The complete line of Charger Plus wheels is designed for weld, metal fabrication, foundry, construction, pipeline and petrochemical applications.All Charger Plus wheels feature a blend of advanced performance zirconia alumina and aluminum oxide. The blending of these two abrasive types results in a high-performance wheel that is value-priced. On-the-job tests of Charger Plus wheels have proven that the increased ratio of aggressive grinding and cutting zirconia alumina grain in Charger Plus wheels improves performance by an average of 30%. Operators can grind faster with less force and less fatigue. They can spend less time grinding, increasing their output and lowering the total grinding and finishing costs. Plus, the longer wheel life provides the added benefit of less downtime to change wheels. Charger Plus Type 27 1/8-inch and ¼-inch thick grinding and cutting wheels are available in 4-, 4½-, 5-, 6-, 7- and 9-inch diameters with both 7/8 and 5/8-11 center holes. Type 28 saucer wheels are available in 7- and 9-inch diameters, ¼-inch thickness and 5/8-11 center holes. Norton is a producer of construction products, high-performance materials, flat glass, and glass containers. write your comments about the article :: © 2006 Construction News :: home page |