contacts
technologies

Performance for power-plant construction

Performance for power-plant construction

Formwork solutions from Doka for the energy projects of tomorrow

Renewable energy is the big growth sector in the power-generation industry. The International Energy Agency (IAE) forecasts that in 2023, renewables will generate almost 30 % of total electricity demand, compared to a figure of 24 % for 2017. Hydropower remains the biggest single source of renewable energy, covering 16 % (by 2023) of worldwide electricity demand, followed by wind farms (6 %), solar (4 %) and bioenergy (3 %). Doka supplies formwork solutions for power-plant construction all over the world and is a player in energy projects for the coming generations.

Hydropower is the biggest renewable source of electricity, producing about 16 % of the world’s electricity with more than 1200 gigawatts (GW) of installed power. The latest IEA forecasts anticipate an increase of 125 GW in cumulative capacity by 2023.

More than 2000 years ago, the ancient Greeks harnessed the power of streams to drive millwheels and grind grain to flour. In modern times, water power is one of the most cost-effective ways of generating electricity and it is often the method of choice, whenever available. Norway, for example, generates 99 % of its electricity from hydropower. In principle, hydropower utilises flowing water to drive turbines. The turbines are either driven by dammed water from reservoirs or are installed in what are known as run-of-river hydroelectric stations. Depending on the capacity of the reservoirs they impound, hydroelectric dams can store water for short or long periods to cover the demand for energy. In a run-of-river hydroelectric station, the flowing water is channelled through the turbine. The amount of energy generated by a plant of this kind depends on the flow rate. In most cases, there is only a slight difference in height between headwater and tailwater.

Know-how from many years of experience in power-plant construction

The history of Doka is closely connected to the construction of power stations. The name Doka has its origin in the supply of formwork components for the Austrian Donaukraftwerke (DOKW) [Danube Power Stations] in the 1950s. The company’s experience of decades in international power station construction is at the disposal of Doka customers for their projects. Doka dam formwork systems are among those tried and proven many times over in dam and barrage construction for hydroelectric power stations.

Dam formwork is used for one-sided forming of structures such as dams and barrages without the use of form ties. The climbing scaffold transfers the concrete loads to the previous pouring section. The dam formwork with its system versions offers economical standard solutions for block heights up to 5.00 m without additional mounting parts and ties. It also adapts flexibly to project-specific requirements because it combines with framed, beam and steel formwork systems. Enclosed, generously dimensioned working platforms up to 2.80 m wide ensure safe working conditions.

High-performing service for successful projects

Doka applies its wealth of formwork and concrete-engineering competence to develop the ideal formwork solution for the project and the chosen method of construction. All this, combined with high-performing service packages, produces an optimised customer solution well able to deal with the challenge of meeting and beating the set of project-related requirements. An all-inclusive logistics concept contributes significantly to success on power station builds with different construction lots. Doka develops end-to-end formwork concepts with detailed utilisation plans through to 3D planning of complex construction lots and utilises synergies between construction lots to save materials. Integrating BIM (Building Information Modelling) into power station projects enables formwork solutions to integrate seamlessly and cost-effectively into construction and eliminates possible future interface problems while the project is still in the planning phase. Doka considers skilled engineering support on site essential for these power-plant projects. Formwork instructors from Doka support the team on site, ensuring professional instruction for the crew and correct assembly and handling of the formwork systems.

These power station projects in diverse countries highlight the expertise of Doka in the energy sector.

Graz-Puntigam run-of river power station on the River Mur – core energy project in Austria

The new 17.7 MW hydroelectric power plant will generate sustainable, eco-friendly electricity for 20, 000 households. Annual CO˛ savings amount to 60, 000 metric tons. The figure is the equivalent of exhaust emissions from 36, 000 private cars. Doka supplied the custom formwork for the complex draft-tube geometry and curved slab formwork for the water intake.
Photo: Murkraftwerk.jpg
Copyright: Doka

Vamma power station – more generating capacity for Norway’s biggest run-of-river power station

The extension of the Vamma power station ranks as one of Europe’s biggest hydropower upgrades since the 1980s. In all, 1500 cubic meters of water per second will flow through the plant’s twelve turbines. Custom formwork built by the Doka Pre-assembly Service was used for the draft tube.
Photo: Vamma hydropower plant.jpg
Copyright: Doka

Wudongde dam – one of the biggest hydropower stations in China

The seventh largest hydropower project in the world consists primarily of the construction of a compound arch dam some 300 metres tall, as well as spillways and water-intake and powerhouse structures. Dam formwork D35 is used to construct the compound-arch dam.
Photo: Wudongde.jpg
Copyright: Doka

Keeyask – Canada’s megasize power station

The 695 MW Keeyask Generating Station is under construction on the Nelson River in the Canadian province of Manitoba. On completion, scheduled for 2021, the plant will supply some 4, 400 GWh of electricity a year to homes and businesses in Canada and the US. 28, 000 m˛ of formwork make Keeyask a record project for Doka North America.
Photo: Keeyask.jpg
Copyright: Doka

Beloporozhskaya hydropower station - electricity for the Republic of Karelia

The 50 MW Beloporozhskaya hydropower station is under construction in the Republic of Karelia in north-western Russia. The power station is scheduled to start generating electricity in autumn 2019. The hydropower station is shaping up steadily, thanks partly to Dam formwork D22.
Photo: Beloporozhskaya hydropower station.jpg
Copyright: Doka

About Doka:
Doka is a world leader in developing, manufacturing and distributing formwork technology for use in all fields of the construction sector. With more than 160 sales and logistics facilities in over 70 countries, the Doka has a high-performing distribution network which ensures that equipment and technical support are provided swiftly and professionally. An enterprise forming part of the Umdasch Group, the Doka employs a worldwide workforce of 6, 700.

Press contact
Doka
Michael Fuker
Public Relations Manager
M +43/664/9610657
press@doka.com
 
press contacts

Michael Fuker
Austria
Mob.:
+43/664/9610657
e-mail original [rar 975 K]
technologies

© 2007